How to Mount Your Own Deer Antlers 

How do you prepare antlers to mount? 

Once you have harvested your deer, you need to prepare the antlers for mounting. You will need a saw and a piece of wood for the mounting bracket. You will need to use a standard crosscut handsaw to remove the antlers and prepare the wood. Before you begin, lock the antlers into a vise and secure the wood to the vice. You should also make separate cuts for each antler. 

Once you have prepared the wood, you need to drill holes through each antler. You will need two screws to attach the antler to the wooden piece. You will need to pre-drill pilot holes first, so that you can avoid cracking the wood. Once you’ve done this, balance the antlers with the help of a screwdriver. Sand the antlers to level them. You may also use a 2×4 that is cut at a 45-degree angle. 

To prepare the wood, first drill holes. It is important to drill holes so that the wood piece will fit in the back of the skull. If you don’t do this step, the antlers will fall off. After drilling the holes, you need to buy a wooden mounting board and prepare your antlers for mounting. A wooden mount is easy to make and costs very little. The only thing that may be hard to find is the wood for mounting. 

The next step is to prepare the wood. You can buy a wood mounting board from the craft store. Otherwise, you can even cut MDF from a piece of wood and drill holes yourself. Just make sure that you choose a board that is slightly larger than the antler base. Then, you can paint it to match the color of the antler. Once you have completed the carving, you are ready to mount the antler. 

Once you have prepared the wood, the antlers are ready to mount. You can purchase a commercial antler mounting board or make a wooden mount. Then, you will need to drill the holes for the screws. Once the wood is ready, you can add a wooden mounting bracket. Once you have done that, you can now paint the antlers to match your wall. Once you have finished the process, you can mount your antlers on the wall. 

Once the wood has been prepared, the antlers should be mounted. This is the most critical step. If you don’t drill the holes correctly, you’ll risk damaging the antlers and ruining your entire mount. Once you’ve finished the mounting process, you can now attach the antlers to the wood. Then, you need to attach the screws and the arrows. You can then hang the antlers to the wood with a nail or a screw or even attach the wooden studs. 

How do you hang deer antlers without a skull plate? 

You’ve boiled and cleaned the deer antlers, so they’re ready to hang. To make hanging them easier, you can use a piece of wood cut at a 45-degree angle. You should be able to fit the antlers in the wood with two screws. To attach the top skull to the bottom section of the antlers, first screw the top skull to the base of the antler. 

To hang the antlers, you’ll need to remove the skull plate and clean them properly. It will fit better against the form if the antlers are cut at an angle – shallower cuts will show the rack more from the top. It’s best to use a hack saw or Dremel tool to make sure the bone is removed without creating an uneven surface. 

To remove the skull plate, you’ll need to skin the skull. You’ll need to remove the skin and cut away the meat. You can also use a sander or file to smooth the antler spread. After cutting through the skull, you’ll need to drill a hole on the right side of the antler. For this, you’ll need to drill a 3/16-inch hole in the wood or metal. 

After cleaning the skull, you’ll need to cut the antlers. To get the best result, you can use a Dremel tool or file to grind the antler spread. Then, center the antler and drill a hole. After drilling the hole, you can insert the antler. To hang deer antlers without a head plate, you must make sure that the antler is placed in the right location. 

A skull plate can be removed from a deer antler without a skull plate. After cleaning, you can mount the antlers by using a cover over the skull plate. This way, you’ll avoid the unsightly part of the antler. You can use a range of different materials for the covering. For example, red velvet or felt will do the trick. Depending on the shape of your antlers, you might choose to add a piece of gold braid around the base of the antler. 

Using a skull plate is not necessary. You can mount an antler without a skull plate as well. While the antlers can be mounted from the skull, they will not fit well if you use the skull plate. The skull plate has the best anchor points, which will hold the antlers in the proper position. Then, you can install them separately. To mount antlers without a skull plate, you need a saw. A standard crosscut handsaw will do the job. 

How much does it cost to mount deer antlers? 

The costs of mounting deer antlers vary, depending on the size and quality of the antlers. Large bucks usually command higher prices, and the best racks can cost as much as $1200 or more. Smaller bucks can be less expensive, but even a modest-sized buck can fetch close to $200. Many taxidermists are happy to accept small antlers for an affordable price. 

The most basic form of deer rack display is the basic antler mount. These can be done at home by a novice and don’t require any special tools or training. You can complete a basic mount for $10 to $30, and it will look decent, but if you’re looking for a more unique presentation, you might consider having it done by a taxidermist. 

If you want your rack to look professional, you might opt for a shoulder mount. The shoulder mount is probably the easiest and cheapest option, but it is time-consuming and requires some experience. You can expect to pay anywhere from $70 to $200 for the service. A pedestal mount is a little more expensive, but you’ll save money in the long run, as it won’t take up floor space. 

Depending on the type of antler mount, the process can cost anywhere from $10 to $30. For the most basic antler mount, you’ll need to clean and tan the deer skull. Then, the taxidermist will apply an adhesive to the antlers and glue them into place. The final price will depend on how detailed your mount is. You can save money by doing it yourself, but the process can be time-consuming and costly. 

There are several types of antler mounts. A basic one costs $10 to $30 while a premium mount can cost up to $150. However, a more elaborate European mount will require cleaning and whitening the skull. For a full-scale European antler mount, you can expect to pay anywhere from $120 to $250. A customized nameplate can cost an additional $100 or so. The basic antler mounting process is also time-consuming. 

If you are looking for a cheaper option, consider a basic antler mount. These are the most economical and do-it-yourself options. You don’t need to hire a taxidermist or buy expensive tools. A standard deer antler mount can be made for as little as $10 to $100. However, more elaborate antler mounts can cost up to $200. 

How do you mount deer shed antlers? 

The most common question asked by hunters is “How do you mount deer shed antlers?” The truth is that there are many different ways to display a buck’s antlers, and you’ll be happy to learn about the variety of options available to you. First, make sure the antlers you plan to display are actually made of wood, not plastic. If you’ve purchased wood antlers, the screws are usually already drilled, so you’ll just have to insert them in the appropriate holes. 

You can mount antlers using two methods. First, drill holes in the base of each antler. If you’re using a wood mount, drill a hole through the button and main beam. Then use duck tape to attach the antlers to the skull cap pins. You can also use a plastic skeleton as a mounting surface if you’re working with a small space. 

For a simple, yet stylish display, you can use a wooden skull cap and mount the antlers in your home. Alternatively, you can use a European mount kit. With a kit like Mountain Mike’s, you’ll only need to drill a hole in the wooden wall and screw in the antlers. Once you’ve drilled the hole, you’ll need to hang the antlers. 

If you’re mounting a single antler, you can just use zip ties to attach it to the wall. If the sheds are cut off from the skull, they can be mounted without any drilling. For more sophisticated displays, you can drill several holes in the antlers and secure them with screws. In either case, you’ll need to make a hole through the button or main beam of the antler. 

Before mounting your antlers, you should make sure that they’re not too thick. You can use a drill bit that’s suitable for the thickness of the antlers. If you don’t have a large enough drill bit, you can just make use of a dowel to attach the antlers. However, if you have a very large sized antler, you’ll need to cut the antler to fit the mounting plate. 

After you’ve collected the antlers, you should prepare the mount. During the mounting process, you should place the antler on the mount. You’ll need to secure the antlers by using duck tape. Then, you should attach the skull cap pins. The skull cap pins should fit perfectly. You should make sure that the antlers’ size matches the size of the wall. 

Depending on the size and shape of your antlers, you may have to make a custom knife. A knife will be the best choice if you’ve already made an order. Often, it’s possible to find a matching antler if you search hard enough, but it is not always easy to do. A custom handle is a great option if you have a large area to cover. 

About the Author