Hunting With Hang-On Stands

At public or private land locations alike, hanging a stand raises you above ground level so that you have better visibility when shooting deer from an elevated location and minimize disturbance to deer. In addition to improving shots, hanging stands also allow hunters to more efficiently follow buck sign and hunt in specific spots that they scouted beforehand.

Hang-on stands require additional climbing aids such as segmented ladders or climbing sticks to be safely and quickly installed in trees, making these aids much simpler to reposition than ladder stands and climbers.


Hang-on stands allow hunters to rise high above deer while remaining hidden, providing an improved opportunity to spot prey more quickly. Furthermore, their elevated position provides a clearer view of the field and helps with targeting bow or gun shots precisely. Nevertheless, hunters must remember that tree stands present an added risk that must be minimized through proper safety equipment use.

Hunters should wear a full-body harness attached to a tree using either a strap or rope safety line; ideally this tether should be as short as possible in order to limit how far a hunter could fall should their stand collapse. Furthermore, hunters should have at hand both cell phones and signaling devices, first aid kits, bottled water supplies as well as emergency contact numbers if there should be an unexpected emergency situation arises.

Selecting an ideal stand site for hunting is equally essential. A hunter should select a tree which is both tall enough and strong enough to support their weight while being straight with no low hanging branches, providing at least 10 feet clearance below and using a harness when climbing up to and down from their stand.

Once in their stands, hunters should take great care to remain still and avoid movements which might spook a deer. This is particularly important when using a climber stand as deers have excellent eyesight that can detect motion at long range. Wearing camouflage when hunting from either a climber or hang-on stand may help conceal hunters from deer.

Hunters should make sure their stand is in excellent working condition before inspecting its safety harness for any signs of damage or wear. No matter whether it’s been in place for years or is brand new, it is crucial that all parts are thoroughly examined prior to climbing into it.


A hang-on stand may be ideal if your hunting property requires frequent movement; these portable stands can easily be transported and set up quickly in minutes. They’re even convenient if hunting public land where winds or weather make accessing other stands impossible; just set it up while keeping hunting!

No matter whether it’s bow season or gun season, having the proper tree stand is vital to your success. Finding one tailored to your individual needs and preferences is the key – for instance a hang-on stand may work great if you prefer traveling light while Hawk has many models that could suit more substantial stands better if this approach suits you better.

Hang-on stands require extra pieces to properly secure them compared to other forms of stands, including a climbing stick or ladder for height gain and installation, and a harness for safety purposes. When purchasing one from LetGo or elsewhere, always inspect all components first to make sure it works as promised, such as tightening all bolts securely before using, double checking I-beam cables are undamaged and replacing worn straps as soon as possible if any. Furthermore, ensure your Lineman’s belt is attached securely within one of the harness loops so in the event of a fall off-again!


Hang-on stands are often preferred by bow hunters due to their ease of installation in tight spots where larger ladder stands or shooting houses cannot fit. Furthermore, this form of stand allows hunters to remain hidden among trees without worrying about brush or other obstructions that could catch deer’s attention.

Hunters must possess the proper materials and equipment in order to set up a hang-on stand successfully, such as climbing sticks or ladder to reach their desired location, haul line and haul line connector, haul line receiver as well as quality treestand safety harness in case of accidents or emergencies.

Once at their destination, hunters should locate an ideal tree on which to install their stand. A general rule of thumb would be selecting one with a straight trunk and few branches; to start the installation process a hunting expert recommends attaching one of their climbing sticks at an approximate 90-degree angle from how you intend to hang your stand.

Once the initial climbing stick has been attached to a tree, hunters should continue attaching additional climbing sticks until reaching their desired height. When all climbing sticks have been secured to the tree, hunters can then lower the hang-on stand into place.

After this step is complete, the hunter can switch out the tether strap tied around their climbing stick for one attached to their harness system and begin hunting their big game adventure! By following these easy steps, a hunter can quickly and efficiently set up their hang-on stand for their big game hunt; with proper preparation this type of treestand provides hunters with exciting hunting experiences close to their targets while remaining concealed and undetected.


Hang-on stands are typically composed of platforms equipped with seats connected to trees via free straps, ratchet straps or harness systems. They offer hunters more versatility than climbing or ladder stands while remaining legal to use on public property – though hunters should first check what regulations exist in their region prior to purchasing this type of stand. They require more maintenance and repairs due to having many moving parts than other forms.

Concealment is of the utmost importance for hunters using tree stands; this can be accomplished by wearing camouflage gear like face masks and gloves as well as covering their surroundings with sufficient cover to avoid silhouettes from appearing. Unfortunately, even the best camouflage cannot hide hunters if they suddenly move from their tree stands; to prevent this happening plan your hunt ahead of time to ensure maximum concealment!

Hang-on stands have many advantages for hunters, such as their adaptability in trees with not perfectly straight branches, enabling hunters to position them where deer frequent. Furthermore, these stands are more versatile than ladder and climbing stands as they can easily be moved from location to location by unhooking from the ground and reattaching back onto the tree.

Ladder stand manufacturers have made advancements to their products over time, such as improved stability and comfort, as well as being able to attach more securely to trees with more branches. A popular example is the Family Tradition Millennium M-100 ladder stand which features an aluminum construction with cam-lock receiver for quick and simple setup and removal.

When selecting a hang-on stand, it is crucial that it meets the level of comfort necessary for long days in the field. While most models offer basic safety harnesses, purchasing a high-quality full-body harness provides even greater comfort on longer hunts. When connecting the tether and harness system to the stand it must allow space for elbows so as to not restrict range of motion.

About the Author